Diberdayakan oleh Blogger.
Tampilkan postingan dengan label NETWORKING. Tampilkan semua postingan
Tampilkan postingan dengan label NETWORKING. Tampilkan semua postingan

List of 802.1X standards

List of 802.1X standards
Standard Description 802.1B-1992 LAN/MAN Management 802.1k-1993 Discovery and Dynamic Control of Event Forwarding (Ame...

Voice VLAN

Voice VLAN
The voice VLAN feature is provided to separate voice traffic from data traffic and assign higher priority to voice traffic, thus decreasing ...

Multiple VLAN Registration Protocol (MVRP) (GVRP)

Multiple VLAN Registration Protocol (MVRP) (GVRP)
Multiple VLAN Registration Protocol (MVRP) formerly known as GARP VLAN Registration Protocol (GVRP) or Generic VLAN Registration Protocol is...

Super VLAN

Super VLAN
Network Diagram Figure 6 Network diagram for super VLAN configuration Network Requirements As shown in Figure 6, Switch A works at the distr...

Isolate-User-VLAN

Isolate-User-VLAN
Network Diagram Figure 5 Network diagram for isolate-user-VLAN configuration Network Requirements Device B and Device C are located in two i...

IP Subnet-Based VLAN

IP Subnet-Based VLAN
Network DiagramFigure 4 Network diagram for IP subnet-based VLAN configuration Network RequirementsAs shown in Figure 4, hosts in the office...

Protocol-Based VLAN

Protocol-Based VLAN
Network DiagramFigure 3 Network diagram for protocol-based VLAN configuration Network RequirementsAs shown in Figure 3, configure protocol-b...

MAC-Based VLAN

MAC-Based VLAN
Network DiagramFigure 2 Network diagram for MAC-based VLAN configuration Network Requirementsl As shown in Figure 2, GigabitEtherne...

Port-Based VLAN

Port-Based VLAN
Network DiagramFigure 1 Network diagram for port-based VLAN configuration Network Requirementsl As shown in Figure 1, Switch A and ...

ISC DHCP 4.1, Solaris 10, Sun Cluster 3.2 1/09 and... Solaris Containers

ISC DHCP 4.1, Solaris 10, Sun Cluster 3.2 1/09 and... Solaris Containers
I’ve been trying to compile ISC DHCP 4.1 and to get it installed on a Solaris 10 u6 (11/08) zone for a few days.Compiling ISC DHCP is a simp...

Console Settings for Linksys - SRW224G4

Console Settings for Linksys - SRW224G4
Default serial console settings for Linksys Switch SRW224G4 (can be changed): Bits per second: 38400 Data bits: 8 Parity: None Stop bits: 1 ...

BPDU Tunneling

BPDU Tunneling
1.1 Why BPDU Tunneling To avoid loops in your network, you can enable the spanning tree protocol (STP) on your device. However, STP gets aw...

QinQ Configuration

QinQ Configuration
1.1 Understanding QinQ In the VLAN tag field defined in IEEE 802.1Q, only 12 bits are used for VLAN IDs, so a switch can support a maximum ...

Novell Netware Remote Printer Configuration Guide

Novell Netware Remote Printer Configuration Guide
Remote printers are a method of allowing a printer, attached to a workstation, to be available for use by all members of the network. This i...

Novell Netware v3.11 Server Install Guide

Novell Netware v3.11 Server Install Guide
Step 1 - Estimate Server Memory Requirements For each DOS volume the amount of memory in Megabytes you need is Total Memory= [(.23 x Volume ...

Novell Netware v2.2 Server Install Guide

Novell Netware v2.2 Server Install Guide
Step 1 - Backup Disks You should make disk copies of the SYSTEM-1, SYSTEM-2, OSEXE, and WSGEN diskettes because the install procedure will w...

Ethernet Tutorial

Ethernet Tutorial
LANs Networks are collections of separate computers that communicate with each other over a common cable or radio medium. Local area network...

VLAN-Transparent Forwarding

VLAN-Transparent Forwarding
VLANs The Ethernet frames that have to be forwarded may reside in different VLANs. This implies that all Ethernet frames contain a (802.1Q) ...

Cisco 2610 Boot Failure

Cisco 2610 Boot Failure
Question: my router just keeps rebooting and i dont know how to stop it to get it back to rommon mode. When the 2610 boots, it goes to the r...

Install and Configure DNS on Windows Server 2003

Install and Configure DNS on Windows Server 2003
From your Windows Server 2003 desktop click on Start>Control Panel>Add or Remove Programs:The add and remove programs window should co...